Standards
+  IEEE 802.11b/g WLAN
+  IEEE 802.3/802.3u Ethernet
+  IEEE 802.3x Flow Control
+  IEEE 802.3af PoE

Ethernet Interface
+  10/100BASE-TX Ethernet port

Radio and Modulation Type
For 802.11b:
DSSS:
+ DBPSK @ 1Mbps
+ DQPSK @ 2Mbps
+ CCK @ 5.5 and 11Mbps
For 802.11g:
OFDM:
+ BPSK @ 6 and 9Mbps
+ QPSK @ 12 and 18Mbps
+ 16QAM @ 24 and 36Mbps
+ 64QAM @ 48 and 54Mbps
DSSS:
+ DBPSK @ 1Mbps
+ DQPSK @ 2Mbps
+ CCK @ 5.5 and 11Mbps

Operating Frequency 
For 802.11b:
+  2400 to 2497MHz
For 802.11g:
+  2400 to 2483.5MHz

Channel Numbers
+  11 Channels (FCC)
+  13 Channels (ETSI)

Data Rates ¹
+  802.11g: 108,54, 48, 36, 24, 18, 12, 9 and 6Mbps
+  802.11b: 11, 5.5, 2, and 1Mbps

Maximum Transmit Output Power ²
17dBm (typical)

Antennas
Embedded 9dBi patch antenna
RN-P N type connector for optional antenna⁵

Receiver Sensitivity
+  For 802.11b, at 8% PER:
     11Mbps: –83dBm
     2Mbps:–89dBm
+  For 802.11g, at 10% PER:
     6Mbps:–87dBm
     9Mbps:–86dBm
     12Mbps:–85dBm
     18Mbps:–83dBm
     24Mbps:–80dBm
     36Mbps:–76dBm
     48Mbps:–71dBm
     54Mbps:–66dBm

Security 
+  64/128/152-bit WEP data encryption
+  WPA-PSK, WPA2-PSK
+  WPA-EAP, WPA2-EAP
+  TKIP, AES support
+  MAC address filtering user access
+  WLAN partitioning
+  Multiple SSID for network segmentation
+  SSID broadcast disable function
+  802.1Q VLAN Tagging
+  Rogue AP detection
+  Network Access Protection

Quality of Service
+  Wireless Multimedia (WMM)

Configurable Operation Modes
+  Access Point
+  WDS with AP
+  WDS
+  Wireless Client

Performance Enhancement  
+  AP grouping for load balance

Device Management 
+  Web Browser Interface:
    - HTTP
    - Secure HTTP (HTTPS)
+  AP Manager II
+   D-View
+  SNMP support:
    - Private MIB
+  Command Line Interface:
    - Telnet
    - SSH

Diagnostic LEDs
+  Power
+  LAN
+  WLAN

Accessories Provided for Outdoor Installation
+ PoE base unit
+ Ethernet cable (4 meters long)
+ Set of grounding wires
+ Wall mount
+ Pole mount (option) ³

Operating Voltage
48VDC +/- 10% for PoE

Power Consumption
+  13.5 watts (max.) with PoE (with heater ON) ⁴

Dimensions
+  190 (L) x 160 (W) x 55 (H) mm

Weight 
+  649g (Without mounting kit)

Operating Temperature
-20˚ to +60˚ C

Storage Temperature
-20˚ to +65˚ C

Operating Humidity
10% to 90% non-condensing, all-weather enclosure

Regulation Certification
+  FCC Class B
+  CE
+  IP 65
+  C-Tick
+  VCCI
+  TELEC
+  NCC
+  Wi-Fi
+  IC
+  CSA International


¹ 54Mbps maximum wireless signal rate derived from IEEE standard 802.11b and 802.11g specifcations. Actual data throughput will vary. 108Mbps when operating with other D-Link 108G wireless devices. Network conditions and environmental factors, including volume of network traffc c, building materials and construction, and network overhead lower actual data throughput rate. Environmental conditions will adversely affect wireless signal range.
² Maximum power setting will vary according to individual country regulations.
³ This device can be mounted on a pole using an optional mounting kit (part number B15900-0033000).
⁴ Power consumption may exceed 802.3af PoE standard when heater is in operation; connect this device through the included PoE Base Unit.
⁵ Embedded patch antenna will be disabled when optional antenna is connected.
⁶ IP65 standard means the device is protected from dust and low pressure jets of water from all directions - limited ingress permitted. It is recommended to place this device under a roof.